Specifications: H7230 available from Mauldin Company, Hattiesburg MS

 
Model

H7230

Conditioner  

Type

Chevron-design intermeshing molded rubber rolls

Length, in. (mm)

102 (2591)

Diameter, in. (mm)

10.4 (264)

Drive

4 HB V-belt and enclosed gears

Speed, rpm 

635

Conditioner Adjustment

Single crank adjustable roll pressure and two stop bolts to adjust roll gap
Dimensions

Height, Transport, ft. in. (m)

5' 8" (1.7)

Height, Operating, ft. in. (m)

4' 5" (1.3)

Width, Transport, ft. in. (m)

11' 3" (3.4) with standard drawbar hitch

Width, Operating, ft. in. (m)

16' 0" (4.6) with standard drawbar hitch

Width, Operating, ft. in. (m) 


Width, Operating, ft. in. (m)  


Length, Transport, ft. in. (m)

17' 7" (5.3) with standard drawbar hitch

Length, Transport, ft. in. (m) 


Length, Transport, ft. in. (m)  


Length, Operating, ft. in. (m)

17' 2" (5.2) with standard drawbar hitch

Length, Operating, ft. in. (m) 


Length, Operating, ft. in. (m)  


Weight, Operating lbs. (kg)

4,165 (1889)
Drive

 

540 or 1000 rpm PTO, enclosed gears and four HB belt
Drive Protection

 

Slip clutch and over-running clutch
Hydraulics

Hydraulic swing

Standard (double-acting cylinder)

Hydraulic lift

Standard (operated by two single-acting cylinders; master/slave)

Hydraulic tilt

Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge

Swath, ft. (mm)

7 (2134)

Windrow, ft. (mm)

Adjustable from 3 to 7 (914 to 2134)
MowMax™Cutterbar with ShockPRO™Hubs

Number of discs

8

Number of knives

16 (2 per disc)

Speed, rpm

3000

Cutting width, ft. in. (mm)

10' 4" (3160)

Cutting angle

2 to 10 degrees, hydraulic control

Cutting height, in. (mm)

0.95 to 3.2 (24 to 81) with standard skid shoes

Ground clearance with header fully raised, in. (mm)

18 (457)

Flotation

Vertical and lateral, adjustable springs
Speeds

Operating, mph (kph)

0 to 9 (0 to 14.5)

Transport, mph (kph)

20 (32)
Tractor Requirement

 

80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar.

 

All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires

Size

11L x 15 6PR