Specifications: H7330 available from Mauldin Company, Hattiesburg MS

 
 Model

 

 H7330
Conditioner    

Type


Flail system with 100 tapered flails and optional textured hood liner

Length, in. (mm)


102 (2591)

Diameter, in. (mm)


22 (560)

Drive


4 HB V-belt

Speed, rpm 


1000 std. or optional 718

Conditioner Adjustment


Adjustable rotor hood with replaceable smooth liner
Dimensions  

Height, Transport, ft. in. (m)


5' 8" (1.7)

Height, Operating, ft. in. (m)


4' 5" (1.3)

Width, Transport, ft. in. (m)


11' 3" (3.4) with standard drawbar hitch

Width, Operating, ft. in. (m)


16' 0" (4.6) with standard drawbar hitch

Width, Operating, ft. in. (m) 



Width, Operating, ft. in. (m)  



Length, Transport, ft. in. (m)


17' 7" (5.3) with standard drawbar hitch

Length, Transport, ft. in. (m) 



Length, Transport, ft. in. (m)  



Length, Operating, ft. in. (m)


17' 8" (5.4) ) with standard drawbar hitch

Length, Operating, ft. in. (m) 



Length, Operating, ft. in. (m)  



Weight, Operating lbs. (kg)


4,065 (1844)
Drive  

 


540 or 1000 rpm PTO, enclosed gears and four HB belt
Drive Protection  

 


Slip clutch and over-running clutch
Hydraulics  

Hydraulic swing


Standard (double-acting cylinder)

Hydraulic lift


Standard (operated by two single-acting cylinders; master/slave)

Hydraulic tilt


Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge  

Swath, ft. (mm)


7 (2134)

Windrow, ft. (mm)


Adjustable from 3 to 7 (914 to 2134)
MowMax™Cutterbar with ShockPRO™Hubs  

Number of discs


8

Number of knives


16 (2 per disc)

Speed, rpm


3000

Cutting width, ft. in. (mm)


10' 4" (3160)

Cutting angle


2 to 10 degrees, hydraulic control

Cutting height, in. (mm)


0.95 to 3.2 (24 to 81) with standard skid shoes

Ground clearance with header fully raised, in. (mm)


17 (432)

Flotation


Vertical and lateral, adjustable springs
Speeds  

Operating, mph (kph)


0 to 9 (0 to 14.5)

Transport, mph (kph)


20 (32)
Tractor Requirement  

 


80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar.

 


All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires  

Size


9.5L x 14 6PR