Specifications: H7450 available from Mauldin Company, Hattiesburg MS

 
Model  

H7450

Conditioner    

Type


Chevron-design intermeshing molded rubber rolls hood liner

Length, in. (mm)


102 (2591)

Diameter, in. (mm)


10.4 (264)

Drive


4 HB V-belt and enclosed gears

Speed, rpm 


740

Conditioner Adjustment


Single crank adjustable roll pressure and two stop bolts to adjust roll gap
Dimensions  

Height, Transport, ft. in. (m)


6' 8" (2.6)

Height, Operating, ft. in. (m)


5' 8" (1.7)

Width, Transport, ft. in. (m)


13' 2" (4.0) with standard drawbar hitch, 2-pt swivel hitch or drawbar swivel hitch

Width, Operating, ft. in. (m)


19' 5" (5.9) with standard drawbar hitch

Width, Operating, ft. in. (m) 


21' 3" (6.5) with 2-pt swivel hitch

Width, Operating, ft. in. (m)  


19' 7" (5.9) with drawbar swivel hitch

Length, Transport, ft. in. (m)


24' 7" (7.2) with standard drawbar hitch

Length, Transport, ft. in. (m) 


26' 5" (8.1) with 2-pt swivel hitch

Length, Transport, ft. in. (m)  


25' 5" (7.4) with drawbar swivel hitch

Length, Operating, ft. in. (m)


20' 2" (5.8) ) w/std drawbar hitch

Length, Operating, ft. in. (m) 


22' 1" (6.7) w/2-pt swivel hitch

Length, Operating, ft. in. (m)  


21' 1" (6.1) w/drawbar swivel hitch

Weight, Operating lbs. (kg)


5,800 (2631)
Drive  

 


1000 rpm PTO, enclosed gears and four HB belt
Drive Protection  

 


Slip clutch and over-running clutch
Hydraulics  

Hydraulic swing


Standard (double-acting cylinder)

Hydraulic lift


Standard (operated by two single-acting cylinders; master/slave)

Hydraulic tilt


Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge  

Swath, ft. (mm)


8 (2438)

Windrow, ft. (mm)


Adjustable from 3 to 8 (914 to 2438)
MowMax™Cutterbar with ShockPRO™Hubs  

Number of discs


10

Number of knives


20 (2 per disc)

Speed, rpm


3000

Cutting width, ft. in. (mm)


13 (3960)

Cutting angle


2 to 10 degrees, hydraulic control

Cutting height, in. (mm)


0.95 to 3.2 (24 to 81) with standard skid shoes

Ground clearance with header fully raised, in. (mm)


18 (457)

Flotation


Vertical and lateral, adjustable springs
Speeds  

Operating, mph (kph)


0 to 9 (0 to 14.5)

Transport, mph (kph)


20 (32)
Tractor Requirement  

 


90 PTO hp (67 kW) or greater with standard Category II, or Category III drawbar or Category III 3-point hitch.

 


All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights.
Tubeless Ag Rib Implement Tires  

Size


31 x 13.5-15